Technology
Markets
Products
Company
Login
Buy Now
| Function | Frequency | Insertion Loss | Isolation | IP3 | RON | Power (CW, max) | Switch Speed | Power Consumption | Lifetime | Controller | VBB or VIN VDD | Packaging | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MM5230 | SP4T (normal-port mode) SPST (super-port mode) (1) | DC–18 GHz DC–26 GHz | 0.1-1.3 dB 0.1-1.4 dB | 25dB @ 6 GHz 42dB @ 6 GHz | 95 dBm | 0.6Ω | 25 W | <10 µs | 0.08 mW | >3B cycles | Direct Drive | 89 V | 2.5 x 2.5 mm WL-CSP |
| MM5130 | SP4T (normal-port mode) SPST (super-port mode) (1) | DC–18 GHz DC–26 GHz | 0.1-1.3 dB 0.1-1.0 dB | 25dB @ 6 GHz 45dB @ 6 GHz | 95 dBm | 1.2Ω | 25 W | <10 µs | 0.08 mW | >3B cycles | Direct Drive | 89 V | 2.5 x 2.5 mm WL-CSP |
| MM5130-NLX | SP4T (normal-port mode) SPST (super-port mode) (1) | DC–18 GHz DC–26 GHz | 0.1-1.3 dB 0.1-1.0 dB | 25dB @ 6 GHz 45dB @ 6 GHz | 95 dBm | 1.2Ω | 25 W | <10 µs | 0.08 mW | >3B cycles | Direct Drive | 89 V | 2.5 x 2.5 mm WL-CSP |
| MM5120 | SP4T | DC–18 GHz | 0.1-1.5 dB | 26 dB @ 6 GHz | 90 dBm | 1.0Ω | 25 W | <15 µs | <15 mW | >3B cycles | SPI/GPIO | 5 V 3.3 V | 5.2 x 4.2 mm LGA |
| MM5140 | SP4T | DC-8 GHz | 0.1-0.5 dB | 32 dB @ 3 GHz | 90 dBm | 1.0Ω | 25 W | <15 µs | <15 mW | >3B cycles | SPI/GPIO | 5 V 3.3 V | 5.2 x 4.2 mm LGA |
(1) Refer to datasheet for other configurations.
The MM5230 device is a high-power and wide frequency range SP4T micro-mechanical switch.
Menlo Micro has developed a new Ideal Switch® fabrication process and applied it to DC and wideband RF/microwave switch applications.
This innovative technology enables highly reliable switches capable of 25 W power handling.
The MM5230 provides ultra-low insertion loss and superior linearity as an SP4T from DC to 18 GHz, and greater than 3 billion switching cycles
Buy Now
Access additional design information on the
Menlo Support Portal >
Top view
Bottom view
The MM5230 on an evaluation kit board.
• DC to 26 GHz Frequency Range
• 25 W (CW), 150 W (Pulsed) Max Power Handling
• Low On-State Insertion Loss: 0.3 dB @ 6.0 GHz
• High Linearity, IIP3 95 dBm Typical
• 25 dB Isolation @ 6.0 GHz / 42 dB Super-Port Mode
• High Reliability >3 Billion Switching Operations
• 2.5 mm x 2.5 mm WLCSP Package (200 µm Solder Ball)
• Defense and Aerospace
• Medical Equipment
• Test and Measurement
• Wireless Infrastructure
• Switched Filter Banks and Tunable Filters
• High Power RF Front Ends
• Antenna Tuning
• Low-Loss Switch Matrices & EM Relay Replacement
 | EM (SMT) SPDT | EM (Coax) SPDT | Key Benefits | |
|---|---|---|---|---|
| Max Frequency | 26 GHz | 6 GHz | 18 GHz | |
| Insertion Loss | 0.3 dB @ 6GHz | 0.8 dB @ 6GHz | 0.2 dB @ 6GHz | |
| Isolation | 42 dB @ 6GHz | 25 dB | 70 dB @ 6GHz | |
| Power Handling | 25 W (CW) >150 W (Pulsed) | 50 W | 50 W - 100 W | |
| Linearity (IP3) | 95 dBm | 62 dBm | >1000x improvement | |
| Power Consumption | <0.08 mW | 140 mW | 5000 mW | 94-99% reduction |
| Reliability | >3B Operations | 10M Operations | 1-5M Operations | >1000x improvement |
| Switching Speed | <10 µs | 3-5 ms | 10-20 ms | >1000x improvement |
| Size/Channel Density | 6.2 mm3 2.5 x 2.5 x 1.0 mm BGA | 1280 mm3 16 x 8 x 10 mm SMT | 30,000 mm3 50 x 50 x 13 mm COAX | >99% reduction |
The MM5130 is the world’s first generally available high-power SP4T RF Ideal Switch.
It can handle 25 W forward power while providing ultra-low insertion loss. It has superior linearity from 26 GHz down to DC and performs more than 3 billion switching cycles.
The four switch channels are individually controllable by applying voltage to the corresponding RF GATE pin.
Access additional design information on the
Menlo Support Portal >
Top view
Bottom view
Bottom view
Profile view, featuring the through-glass-vias
The MM5130 on an evaluation kit board.
The MM5130 on an evaluation kit board.
• DC to 26 GHz Frequency Range
• 25 W (CW), 150 W (Pulsed) Max Power Handling
• Low On-State Insertion Loss: 0.3 dB @ 6.0 GHz
• High Linearity, IIP3 95 dBm Typical
• 25 dB Isolation @ 6.0 GHz / 45 dB Super-Port Mode
• High Reliability >3 Billion Switching Operations
• 2.5 mm x 2.5 mm WLCSP Package
• Defense and Aerospace
• Medical Equipment
• Test and Measurement
• Wireless Infrastructure
• Switched Filter Banks and Tunable Filters
• High Power RF Front Ends
• Antenna Tuning
• Low-Loss Switch Matrices & EM Relay Replacement
| EM (SMT) SPDT | EM (Coax) SPDT | Key Benefits | |
|---|---|---|---|---|
| Max Frequency | 26 GHz | 6 GHz | 18 GHz | |
| Insertion Loss | 0.4 dB @ 6GHz | 0.8 dB @ 6GHz | 0.2 dB @ 6GHz | |
| Isolation | 45 dB @ 6GHz | 25 dB | 70 dB @ 6GHz | |
| Power Handling | 25 W (CW) >150 W (Pulsed) | 50 W | 50 W - 100 W | |
| Linearity (IP3) | 95 dBm | 62 dBm | >1000x improvement | |
| Power Consumption | <0.08 mW | 140 mW | 5000 mW | 94-99% reduction |
| Reliability | >3B Operations | 10M Operations | 1-5M Operations | >1000x improvement |
| Switching Speed | <10 µs | 3-5 ms | 10-20 ms | >1000x improvement |
| Size/Channel Density | 5.6 mm3 2.5 x 2.5 x 0.9 mm BGA | 1280 mm3 16 x 8 x 10 mm SMT | 30,000 mm3 50 x 50 x 13 mm COAX | >99% reduction |
The MM5130-NLX is the world’s first generally available high-power SP3T RF Ideal Switch.
It can handle 25 W forward power while providing ultra-low insertion loss. It has superior linearity from 26 GHz down to DC and performs more than 3 billion switching cycles.
The four switch channels are individually controllable by applying voltage to the corresponding RF GATE pin.
Buy Now
Access additional design information on the
Menlo Support Portal >
Top view
Bottom view
Bottom view
Profile view, featuring the through-glass-vias
The MM5130 on an evaluation kit board.
The MM5130 on an evaluation kit board.
• DC to 26 GHz Frequency Range
• 25 W (CW), 150 W (Pulsed) Max Power Handling
• Low On-State Insertion Loss: 0.3 dB @ 6.0 GHz
• High Linearity, IIP3 95 dBm Typical
• 45 dB Isolation @ 6.0 GHz
• High Reliability >3 Billion Switching Operations
• 2.5 mm x 2.5 mm WLCSP Package
• Defense and Aerospace
• Medical Equipment
• Test and Measurement
• Wireless Infrastructure
• Switched Filter Banks and Tunable Filters
• High Power RF Front Ends
• Antenna Tuning
• Low-Loss Switch Matrices & EM Relay Replacement
| EM (SMT) SPDT | EM (Coax) SPDT | Key Benefits | |
|---|---|---|---|---|
| Max Frequency | 26 GHz | 6 GHz | 18 GHz | |
| Insertion Loss | 0.4 dB @ 6GHz | 0.8 dB @ 6GHz | 0.2 dB @ 6GHz | |
| Isolation | 45 dB @ 6GHz | 25 dB | 70 dB @ 6GHz | |
| Power Handling | 25 W (CW) >150 W (Pulsed) | 50 W | 50 W - 100 W | |
| Linearity (IP3) | 95 dBm | 62 dBm | >1000x improvement | |
| Power Consumption | <0.08 mW | 140 mW | 5000 mW | 94-99% reduction |
| Reliability | >3B Operations | 10M Operations | 1-5M Operations | >1000x improvement |
| Switching Speed | <10 µs | 3-5 ms | 10-20 ms | >1000x improvement |
| Size/Channel Density | 5.6 mm3 2.5 x 2.5 x 0.9 mm BGA | 1280 mm3 16 x 8 x 10 mm SMT | 30,000 mm3 50 x 50 x 13 mm COAX | >99% reduction |
The MM5120 is the world’s first generally available high-power SP4T RF Ideal Switch.
This new innovative technology platform enables robust and highly reliable switches capable of >25 W CW power handling at 6.0 GHz. The MM5120 provides ultra-low insertion loss and superior linearity from DC to 18 GHz with >3 billion switching cycles.
The MM5120 features an integrated charge pump and driver circuit with SPI and GPIO interface control options.
Buy Now
Access additional design information on the
Menlo Support Portal >
MM5120 Switched Filter Bank
• DC to 18 GHz Frequency Range
• Integrated High-Voltage Driver
• 25 W (CW), 150 W (Pulsed) Max Power Handling
• Low On-State Insertion Loss: 0.4 dB @ 6.0 GHz
• High Linearity, IIP3 > 90 dBm
• > 25 dB Isolation @ 6.0 GHz
• Low Power Consumption <15mW
• High Reliability >3 Billion Switching Operations
• 5.2 mm x 4.2 mm LGA Package
• Defense and Aerospace
• Test and Measurement
• Wireless Infrastructure
• Switched Filter Banks and Tunable Filters
• High Power RF Front-Ends
• Low-Loss Switch Matrices
• RF EM Relay Replacement
• Antenna Tuning
• Antenna Beam Steering
• Digital Step Attenuators
| EM (SMT) SPDT | EM (Coax) SPDT | Key Benefits | |
|---|---|---|---|---|
| Max Frequency | 18 GHz | 6 GHz | 18 GHz | |
| Insertion Loss | 0.4 dB @ 6GHz | 0.8 dB @ 6GHz | 0.2 dB @ 6GHz | |
| Isolation | >25 dB @ 6GHz | 25 dB | 70 dB @ 6GHz | |
| Power Handling | 25 W (CW) >150 W (Pulsed) | 50 W | 50 W - 100 W | |
| Linearity (IP3) | >90 dBm | 62 dBm | 99% reduction in power consumption | |
| Power Consumption | <15 mW | 140 mW | 5000 mW | 90-99% reduction |
| Reliability | >3B Operations | 10M Operations | 1-5M Operations | >1000x improvement |
| Switching Speed | < 15 µs | 3-5 ms | 10-20 ms | >1000x improvement |
| Size/Channel Density | 33 mm3 5.2 x 4.2 x 1.5 mm LGA | 1280 mm3 16 x 8 x 10 mm SMT | 30,000 mm3 50 x 50 x 13 mm COAX | >99% reduction |
The MM5140 is the world’s highest performance generally available SP4T RF Ideal Switch module.
This new innovative technology platform enables robust and highly reliable switches capable of 25 W CW power handling at 3.0 GHz. The MM5140 provides ultra-low insertion loss and superior linearity from DC to 8 GHz with >3 billion switching cycles.
The MM5140 features an integrated charge pump and driver circuit with SPI and GPIO interface control options.
Buy Now
Access additional design information on the
Menlo Support Portal >
Top view
Bottom view
Bottom view
MM5140 on an evaluation kit board.
• DC to 8 GHz Frequency Range
• Integrated High-Voltage Driver
• 25 W (CW), 150 W (Pulsed) Max Power Handling
• Low On-State Insertion Loss: 0.5 dB @ 8.0 GHz
• High Linearity, IIP3 > 90 dBm
• > 25 dB Isolation @ 6.0 GHz
• Low Power Consumption <15mW
• High Reliability >3 Billion Switching Operations
• 5.2 mm x 4.2 mm LGA Package
• Defense and Aerospace
• Test and Measurement
• Wireless Infrastructure
• Switched Filter Banks and Tunable Filters
• High Power RF Front-Ends
• Low-Loss Switch Matrices
• RF EM Relay Replacement
• Antenna Tuning
• Antenna Beam Steering
• Digital Step Attenuators
| EM (SMT) SPDT | EM (Coax) SPDT | Key Benefits | |
|---|---|---|---|---|
| Max Frequency | 8 GHz | 6 GHz | 18 GHz | |
| Insertion Loss | 0.5 dB @ 8GHz | 0.8 dB @ 6GHz | 0.2 dB @ 6GHz | |
| Isolation | >25 dB @ 6GHz | 25 dB | 70 dB @ 6GHz | |
| Power Handling | 25 W (CW) >150 W (Pulsed) | 50 W | 50 W - 100 W | |
| Linearity (IP3) | >90 dBm | 62 dBm | 99% reduction in power consumption | |
| Power Consumption | <15 mW | 140 mW | 5000 mW | 90-99% reduction |
| Reliability | >3B Operations | 10M Operations | 1-5M Operations | >1000x improvement |
| Switching Speed | <15 µs | 3-5 ms | 10-20 ms | >1000x improvement |
| Size/Channel Density | 33 mm3 5.2 x 4.2 x 1.5 mm LGA | 1280 mm3 16 x 8 x 10 mm SMT | 30,000 mm3 50 x 50 x 13 mm COAX | >99% reduction |
